Firestone
QuickSeam splicing products form the best possible solution for on-site
seaming, joining and repairing EPDM Liner. We supply the full range of
products in a variety of full pack and split pack quantities. We
also provide a free quick reference seaming guide for use by Firestone
trained installers in addition to the full Firestone Installation Manual.
Watch our new Seaming Tutorials and learn how to use the QuickSeam products.
POND LINER SEAMING TUTORIAL - Firestone
QuickSeam™ Repair Patch Kit
POND LINER SEAMING TUTORIAL - Firestone
3" QuickSeam™ Splice Tape Seaming
POND LINER SEAMING TUTORIAL - Fitting a prefabricated Pipe Sleeve
Firestone
QuickSeam™ Components and Accessories for larger seaming projects.
QuickSeam™
3" Splice Tape for field seaming of Firestone EPDM PondGard panels. Used with QuickPrime
Plus Primer and a QuickScrubber pad to clean and prime mating surfaces.
Supplied as a 76mm x 30.48 m (3.0” x 100ft) roll or part roll cut
to the nearest 0.5m.
QuickSeam™
9" Form Flash is a 228mm (9") wide, uncured EPDM flashing
laminated to cured seam tape. QuickSeam FormFlash is used to flash inside
and outside corners, reinforce lap seams, cover repairs, pipe penetrations
pockets and other applications as specified by Firestone Installation
Guidelines. Supplied
as a 228 mm x 15.24 m (9.0” x 50ft) full roll (or part roll cut
to the nearest 0.5m). Thickness:
1.6 mm (0.065” ). Used with QuickPrime Plus Primer and a QuickScrubber
pad and handle to clean and prime mating surfaces.
QuickSeam
18" SA Flashing is used for lap cover repairs and reinforcing
seams etc.This product consists of a cured membrane with quickseam tape
already applied. It is applied to the liner using quickprime plus.
 Download
the SA Flashing specification sheet.
QuickPrimePlus is the solvent designed to clean and prime the EPDM membrane prior to application of QuickSeam products. QuickPrimePlus is applied to the membrane manually with a Quickscrubber Pad and Handle.
QuickSeam™
Universal Pipe Sleeve (Moulded
EPDM) For sealing
around liner pipe penetrations. Suitable for pipe sizes: 25.4 mm - 174.6 mm
(1.0" - 6.875") O.D. Sleeve has moulded steps for
the Pipe Outside Diameters listed below:
25.4
mm - 34.9 mm (1.0" - 1.375")
41.3 mm - 47.6 mm (1.625" - 1.875")
50.8 mm - 66.7 mm (2.0" - 2.625")
69.8 mm - 92.1 mm (2.75" - 3.625")
102.0 mm - 114.0 mm (4.0" - 4.50")
127.0 mm - 141.0 mm (5.0" - 5.50")
152.4
mm - 174.6 mm (6.0" - 6.875")
Comes
complete with QuickSeam Tape already applied to flange and Stainless Steel
clamp to secure to pipe. Base Flange: 330 mm (13.0") O.D. (Note:
Installation requires QuickPrimePlus Primer, Scrubber Pad, Hand roller,
Water Block Seal and Lap Sealant).
For larger projects we
are happy to recommended Firestone Trained Installers in your area for installation and site seaming of Firestone PondGard EPDM liners.
When using Firestone Seaming Products follow all appropriate Safety Guidelines.
For Material Safety Data Sheets please go to:-
http://www.firestonelining.eu/lining/tech_data/msds/_en/index.shtm
|
